WATCH FOR 2024-2025 NEW PRODUCTS COMING SOON!

24 of 48 Items
  • GX200-914010 MINI Z

    Mini Z 6.5 Horsepower GX200 Upgrade Engine

    If your son or daughter is getting bigger and you feel the need for more speed and power, this is the way to go. This engine will bolt right in your stock Mini Z or Mini Rev with very little modification. The 6.5 upgrade engine will work with your stock...

    $677.00 - $1,186.90
  • PSKGX200 MINIZ Skidoo GX200 Drive Train Setup

    Skidoo GX200 Drive Train Setup

      This is the perfect setup for the customer that has just purchased a GX200 engine, and still has stock clutching.  The kit comes with our Next Level Dominator race clutch and extra engagment springs          ...

    $297.64
  • CHAMPMINIZ

    Skidoo ISR Legal Champ Race Engine

    These are the original Championship winning engines that were designed for the ISR 120 Champ Ice Oval and SnoX class. Every engine comes race ready and has been dyno tested for peak performance.Prices starts at $1,650.00 for standard Champ and $2,150.00...

  • GX200 & LO206 Motor Comparison

    GX200 & LO206 Motor Comparison

    Honda GX200 ----------vs---------Briggs LO-206 Great yard sled or trail riding                                           Great racing engine, less...

  • STOCK RACE PREP WHEN SHIPPING IN ENGINE AND PARTS (NOT FULL SLED)

    Stock Engine Race Preparation

    PRICE DOES NOT INCLUDE PARTS OR ENGINE. PLEASE CALL FOR MORE INFORMATION AND EXACT PRICING. *Boring and valve guide replacement extra* The problem with stock 120 engines when used for racing is that their performance decreases as they get hot or heat...

  • ERMINIZA

    Skidoo 120 Engine Rebuild Kit

    *PLEASE NOTE THE NUMBERS ON THE BLOCK IN THE COMMENTS AREA OF CHECKOUT TO ENSURE CORRECT PISTON AND RINGS ARE SENT* We came up with the Engine Rebuild Kit for all you do it your self customers. The kit is made up of the most common wear parts we...

    $172.18
  • Mini Z & Mini Rev Adjustable Main Jet Kit

    Mini Z & Mini Rev Adjustable Main Jet Kit

    We developed and built an adjustable main jet so you can set your carb for peak performance at any temp.This is a must for stock class racing. Instructions *Will also work on GX160 and GX200 Honda engines along with Blue Clone engines.*

    $56.18
  • Mini Z & Mini Rev Power Intake Kit

    Mini Z & Mini Rev Power Intake Kit

    Best performance gain for your dollar. Our kits include a special preload and rate governor spring to let the 120 rev higher without damaging its plastic governor like solid wires can do. The new style spring will also give you a...

    $95.13
  • Honda Clone Engine Tuning Kit 120 Mini Z Snowmobile

    Honda Clone Engine Tuning Kit Mini Z

    Using these two components together allows for the best tunability for your Honda clone engine. The tunable pipe allows for adjustability for your top or bottom end power. The Adjustable Main Jet will ensure you can get the right fuel mixture for your...

    $181.03
  • TPMZA TPMZA

    Skidoo High Performance Exhaust

    When you build a pipe for an engine, the pipe length and diameter are a big factor. When you're limited on room to put the pipe, a whole different set of problems come about. That is why we designed a tunable pipe. By sliding the silencer farther on...

    $124.85
  • Mini Z & Mini Rev Cryogenic Rocker Arm 14431-ZE1-000C

    Mini Z & Mini Rev Cryogenic Rocker Arm

    We have done a lot of testing on the Arctic Cat Z/ZR 120, Polaris XC/XCR 120, and Ski Doo MiniZ/Mini Rev 120 engines. We've modified them and have found the weak link to be the rocker arms, especially when using a different cam and heavy valve springs...

    $16.99
  • ISR Legal Rev Limiter ISR Legal Rev Limiter ISR120RL/ISR120RLS ISR Legal Rev Limiter

    ISR Legal Rev Limiter

    For 2014/2015 race season the ISR requires a Rev Limiter in all 120 stock class racing. This rule still applies. The rule was put into place to equalize the engine RPMs between brands. 6850 rpm will be the limit setting. This was a long time request by...

  • VS-CHAMP VS-CHAMP

    Heavy Duty Champ Valve Springs

    These springs were designed to handle the higher RPMs and loads of high performance camshafts. This is the same spring we use in our Champ racing engines. *Not to be used in the STOCK SUZUKI or YAMAHA engine.* NOT LEGAL FOR STOCK CLASS 

    $16.95
  • PRMZ4600 PRMZ4600

    Mini Z Chrome Moly Push Rods

    When running the Skidoo Mini Z at higher than normal engine RPMs we have found that the push rods start to flex or in some cases even bend causing less valve lift and a loss in performance, these are a must for anyone running heavier valve springs. Our...

    $35.00
  • HW1INCH High Temp Exhaust Wrap Pliers used for heat wrap clamps.

    High Temp Exhaust Wrap

    This material has 2 very good uses on a little sled. 1 is to keep under hood temperatures down so your engine can breath cool air and make more horse power, and 2 is when you cover your exhaust pipe you retain more pipe heat which makes the gasses travel...

24 of 48 Items